Hunter Fan Wiring Wiring For Ceiling Fan/light 3-way Switch With Separate Switch For Fan AND A Remote Control?
Wiring for ceiling fan/light 3-way switch with separate switch for fan AND a remote control? - hunter fan wiring
It is a Hunter fan / light with remote control. Double-cable with 3 switches. On one wall there are two switches - presumably by the light one for the fan. On another wall has a switch. Inside the box on the ceiling many connections - there are three black son out of the box (it is) is in black and white stripes. The fan has only a distant black, white and earth from the control unit.
Whatever I do, illuminated wall switch does not turn on the lights or the lights when the power is on, but after a little when a switch. The fan and light both work with the remote control ...
|
2 comments:
isolate with a voltmeter to all, the son of the ceiling panel in order to identify incoming j @ hot foods in order to determine the course, you need to use the ohmmeter to identify the switch legs when identifying each driver, Mark You be able to carry cable, with this knowledge, you seem very competent enough to care and remember to turn off the switch before the joints can break his back to check if the wire nut input cable cap power.use connection does not accidentally cause a short time to identify the circuits.
Although you gave a very good explanation of the problem is difficult to answer, without seeing the situation. If you have money, that's the best thing for you to hire a professional. If not, then you have a friend who knows a lot about the wiring. The short speech is worrisome and can be dangerous. It is necessary to quickly solve the problem. Thus, a qualified professional or a friend.
Post a Comment